Problems

3)The Auto adjustment button does not work properly.

4)Frequency does not change after installing “Monitor information file” in the attached utility disk on Windows 95/98.

Points to check with possible solutions

The Auto adjustment function is intended for use on Macintosh and IBM compatibles PCs running Windows. It may not work properly if either of the following applies.

- You are running an AT-compatible PC on MS- DOS (not Windows).

-The background color for the “wallpaper” or “desktop” pattern is set to black.

Some signals from the graphics boards may not function properly. Follow the adjustment procedure on page 20, adjust step by step using the “Screen” menu.

Use the graphics board’s utility software to change the input signal frequency.

For problems with USB function, refer to the troubleshooting on page 36.

40 4 TROUBLESHOOTING