(5) “Phase” Adjustment

E

Function

Eliminates the horizontal bars of distortion.

a)Select the “Phase” icon and push the Enter button to show the “Phase” menu.

b)If horizontal bars appear, these can be eliminated by adjusting the right and left buttons.

c)After finishing the adjustment, push the Enter button to memorize the settings and return to the “Screen” menu.

·“Phase” adjustments should be done after adjusting the “Clock”.

·Horizontal bars may not completely disappear from the screen depending on the PC.

·The phase adjustment decides the sampling point for converting the analog input signal to a digital signal. Adjusting the “Phase” after the “Clock” adjustment will produce a clear screen.

(6)Position Adjusment Function

Controls the screen position.

a)Select the “Position” icon and push the Enter button to enter the “Position menu. Adjustment markers are displayed on each corner of the screen.

b)Adjust the position of the upper left corner of the image using the Control buttons in order to align the screen.

·If vertical bars of distortion appear after finishing the “Position” adjustment, return to “Clock” menu and repeat the previously explained adjustment procedure (“Clock” “Phase” “Position”).

2 USING THE SCREENMANAGER 23