31
Chapter5Troubleshooting
Chapter 5 Troubleshooting

If a problem still remains after applying the sugges ted remedies, contact your local EIZO representat ive.

5-1. No picture

Problem Possible cause and remedy
1. No picture
• Powerindicatordoesnotlight.
• Checkwhetherthepowercordisconnectedprope rly.
• Iftheproblempersists,turnoffthemonitor,andthenturn
itonagainafewminuteslater.
• Powerindicatorislightingblue. • Increase“Brightness”,“Contrast”,or“Gain”intheSettin g
menu(see“Toperformadvancedadjustments”(page15)).
• Powerindicatorislightingorange. • Switchtheinputsignalwith .
• Movethemouseorpressanykeyonthekeyboard.
• CheckwhetherthePCisturnedon.
• DependingonthePCandgraphicsboard,theinputsignal
isnotdetectedandthemonitordoesnotrecoverfrom
thepowersavingmode.Ifthescreenisnotdisplayed
evenaftermovingthemouseorpressinganykeyonthe
keyboard,turnthemonitoroffandonusingitspower
button.Whenthescreenisdisplayed,executethe
followingprocedure.Theproblemmaybeimproved.
1. Press toturnoffthemonitor.
2. Holddown whilepressing toturnonthe
monitor.
“x”isdisplayedonthemenutitleof“Information”ofthe
Settingmenu(see“6-4.DisplayingMonito rInformation”
(page38)).
3. RebootthePC.
Toreturntotheprevioussetting,performsteps1to3
again.
• Powerindicatorisashingorange. • ThedevicethatisconnectedusingDisplayPorthavea
problem.Solvetheproblem,turnoffthemonitor,andthen
turnitonagain.RefertotheUser’sManualoftheoutput
deviceforfurtherdetails.