21
Chapter2AdjustingScreens

2.

Prepare to use analog screen adjustment patterns.

Load the “EIZO LCD Utility Disk” to your PC, and then op en the “Screen adjustment pattern  les”.
Note
• For details and i nstructions on openi ng the “Screen adjustment pat tern les”, refer to the Readme.txt le.

3.

Perform the auto adjustment again with the analog screen adjustment pattern

displayed.

● To adjust ickering, screen position, and screen size automatically
Procedure
1. Display Pattern 1 i n full screen on the monitor using the “Scre en adjustment pattern les”.
2. Choose “Screen” i n the Setting menu, and press .
3. Choose “Analog Adjustment” in the “Sc reen” menu, and press .
4. Choose “Auto Screen Adjust” in the “Analog Adjustment” menu, and pre ss .
5. Select “Yes” with or , and press .
Flickering, screen position, and scre en size are corrected by the aut o-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterper formingtheautoadjustment,performadjustme nts
accordingtothefollowingprocedure.Ifthescreenisdisplayedco rrectly,goto“5.Adjustingcolorgradation.”
(page23).

4.

Choose “Screen” from the Setting menu to perform advanced adjustments.

Adjust the clock, phase and position, in this order.
● To eliminate vertical bars
Procedure
1. Choose “Analog Adjustment” in the “Sc reen” menu, and press .
2. Choose “Clock” in the “Analog Adjustment” me nu, and press .
The “Clock” menu appears.
3. Adjust the clock with or to elimi nate vertical bars.
Press or slowly so as not to miss the adjustment point.
4. Press to exit.
When blurring, ickering or ba rs appear on the screen aft er adjustment, proceed to “To remove ickering or blu rring ”.