DMX OPERATOR PRO
14
7.3.1 Record a Moving Light Scene
This section takes you through the necessary steps to record moving light Scenes. You will be
using the section for moving lights which is located on the left side of your console or all buttons to
the left of the LCD display- including buttons in the L CD display section. The Scene buttons you
will be recording to- are located on the upper top left section of your console numbered 1 through
8. Scenes can be played back one of two ways. The first way is to manually trigger each desired
scene and the second is to include the desired group of scenes into a Show for automatic
sequential playback.
(1) Press and hold down the "RECORD" button for three (3) seconds or until the green
LED next to the RECORD button comes on. The LCD will display the following:
SELECT A SCENE
OR SHOW! PAGE01
(2) If this is your first time recording Scenes, you should start saving them on Page #01-
please go to step #3 now. If you want to select a different page number from what is
displayed, press the “PAGE” button so that the red LED above the Page button
comes ON and then use the “UP” and “DOWN” buttons to scroll through to the other
pages. To select the new page, simply stop on the desired page and go to step #3.
There are a total of 12 pages.
(3) Select the “SCENE” button where you wish to record to. The selected Scene LED
will flash repeatedly. For example, if you are on Page #01 and you select Scene #1,
the LED above the #1 Scene button will flash repeatedly and your LCD will display the
following:
EDIT SCENE1/PG01
SAVE ESC PAGE01