15
7.3.1 Record a Moving Light Scene (Cont.)
(4) Select the “FIXTURE” or fixtures that you wish to include into the selected scene.
The selected fixture will have its LED flashing above the button. To select more than
one fixture at a time, simultaneously press and hold down the “GROUP” button and
select the fixture #’s that you want grouped. In this case, all selected fixtures will have
their LED’s flashing in tandem.
(5) Next, use the faders to set your moving lights to the look you desire. To control
channels 1-8 of your moving lights, make sure the “CH.PAGE” L ED is OFF. To
control channels 9-16, make sure the “CH.PAGE” LED is ON.
(6) Once your look is set, press the “RECORD” button to SAVE. All LED’s will flash once
confirming that your scene has been saved. Your LCD will once again display the
following:
SELECT A SCENE
OR SHOW! PAGE01
(7) To record additional Scenes, repeat steps 3 thru 6.
(8) To exit record mode, press the “ESC” button one time.