Elation Professional 3.0 24-004-1262 8.4 Channel Patch

DMX OPERATOR PRO

8.4 Channel Patch

(1) Press and hold down the "SETUP" button for three (3) seconds or until the green

LED above the SETUP button comes on. The LCD will display the following with a

cursor box flashing over the # 1 option.

1. CF CARD ↓

2. ASSIGN CH.

(2) Press the "DOWN" button one (1) time so that the cursor is now flashing over the # 2

"ASSIGN CH." option. The LCD will display the following with the cursor box now

flashing over the # 2 option.

1. CF CARD ↓

2. ASSIGN CH.

(3) Press the "Record" button to enter the assign channel option. The LCD will display

the following:

CHANNEL01>OUT01

OK ESC SEL ADJ

(4) Use the "UP" button to scroll through the 16 channels and use the “DOWN” button to

change the corresponding fader output. For exampl e, if I want channel # 1 to be

controlled by fader # 7 on the console, the LCD will display the following:

CHANNEL01>OUT07

OK ESC SEL ADJ

(5) Repeat step 4 until you have patched all desired channels.

Contents

Main DMX OPERATOR PRO USER MANUAL DMX OPERATOR PRO Table of Contents Sections: DMX OPERATOR PRO Table of Contents (Cont.) Section 1: General introduction Section: 2 Safety Information & Maintenance DMX OPERATOR PRO Section: 3 Information Notice Product Modification Warning: Updates & Changes: Copyright: Section: 5 Technical Specifications Section: 6 Basic Control Parts Section: 6 Basic Control Parts (Cont.) DMX OPERATOR PRO Section: 6 Basic Control Parts (Cont.) 6.2 Rear panel DMX OPERATOR PRO Section: 7 Set Up 7.1 Connections (4) In a daisy chain manner, continue to connect the remainder of your moving lights and DMX OPERATOR PRO 7.1.1 Setting DMX Address Channels for Moving Lights (5) Continue to address the remainder of your fixtures according to the chart below. DMX OPERATOR PRO 7.1.2 Setting DMX Address Channels for Dimmer Packs (Par Cans) 7.2 Assign Joystick to Pan & Tilt DMX OPERATOR PRO Page DMX OPERATOR PRO 7.3 Recording Moving Lights 7.3.1 Record a Moving Light Scene DMX OPERATOR PRO 7.3.1 Record a Moving Light Scene (Cont.) DMX OPERATOR PRO 7.3.2 Record a Moving Light Show DMX OPERATOR PRO 7.3.2 Record a Moving Light Show (Cont.) DMX OPERATOR PRO 7.4 Playback Moving Light Scenes and Shows 7.4.1 Playback Moving Light Scenes DMX OPERATOR PRO 7.4.2 Playback Moving Light Shows DMX OPERATOR PRO 7.5 Edit Moving Light Shows 7.5.1 Add Moving Light Show steps DMX OPERATOR PRO 7.5.1 Add Moving Light Show steps (Cont.) 7.5.2 Delete Moving Light Show steps DMX OPERATOR PRO 7.5.3 Delete Moving Light Shows DMX OPERATOR PRO 7.6 Recording Par Can Scenes and Chases 7.6.1 Record a Par Can Scene DMX OPERATOR PRO 7.6.1 Record a Par Can Scene (Cont.) 7.6.2 DMX OPERATOR PRO 7.6.2 Record a Par Can Chase (Cont.) DMX OPERATOR PRO 7.7 Playback Par Can Scenes and Chases 7.7.1 Playback Par Can Scenes DMX OPERATOR PRO 7.7.2 Playback Par Can Chases DMX OPERATOR PRO 7.8 Edit a Par Can Chase 7.8.1 Add Par Can Chase steps DMX OPERATOR PRO 7.8.1 Add Par Can Chase steps (Cont.) 7.8.2 Delete Moving Light Chase steps DMX OPERATOR PRO 7.8.3 Delete a Par Can Chase DMX OPERATOR PRO Section: 8 Menu Options Set Up 8.1 Access Menu Options 8.2 Save to CF Card Page Page 8.4 Channel Patch 8.4 Channel Patch (Cont.) 8.5 Pan / Tilt Fade Set Up 8.5 Pan / Tilt Fade Set Up (Cont.) 8.6 Display Mode Set Up 8.6 Display Mode Set Up (Cont.) 8.7 MIDI Channel Set Up Section: 9 MIDI Trigger Chart Section: 10 CF Card Important Notice