24
7.6.1 Record a Par Can Scene (Cont.)
(4) Adjust the “MASTER” fader all the way up to ten (10). The LCD will display the
following:
MSTR255
SAVE ESC PAGE01
(5) Next, use the eight (8) faders, labeled 129-136, to set your desired Par Can scene.
(6) Once your look is set, press the “RECORD” button to SAVE. All LED’s will flash once
confirming that your scene has been saved. Your LCD will once again display the
following:
SELECT A SCENE
OR CHASE! PAGE01
(7) To record additional Scenes, please repeat steps 3 thru 6.
(8) To exit record mode, press the “ESC” button one time.
7.6.2 Record a Par Can Chase
(1) Press and hold down the "RECORD" button for three (3) seconds or until the green
LED next to the RECORD button comes on. The LCD will display the following:
SELECT A SCENE
OR CHASE! PAGE01
(2) Select the “CHASE” button 1-6, where you wish to record to. The selected Chase
LED will flash repeatedly. For example, if you select CHASE #1, the LED above the
#1 CHASE button will flash repeatedly and your LCD will display the following:
EDIT CHASE1/TL00
ADD ESC STEP00