DMX OPERATOR PRO
23
7.6 Recording Par Can Scenes and Chases 7.6.1 Record a Par Can Scene
This next section will take you through the necessary steps to record Par Can Scenes. You will be
using the Par Can section which is located on the right side of your console or all buttons and
faders to the right of the LCD display- including buttons in the LCD display section. The Scene
buttons you will be recording to- are located on the upper top right section of your console
numbered 1 through 6. The faders that you will use to set your Scenes are labeled 129-136.
Scenes can be played back one of two ways. The first way is to manually trigger each desired
scene and the second is to include the desired group of Scenes into a Chase for automatic
sequential playback. Please refer to section 7.1.2 for dimmer pack set up.
(1) Press and hold down the "RECORD" button for three (3) seconds or until the green
LED next to the RECORD button comes on. The LCD will display the following:
SELECT A SCENE
OR CHASE! PAGE01
(2) If this is your first time recording Scenes, you should start saving them on Page #01-
please go to step #3 now. If you want to select a different page number from what is
displayed, press the “PAGE” button so that the red LED above the Page button
comes ON and then use the ���UP” and “DOWN” buttons to scroll through to the other
pages. To select the new page, simply stop on the desired page and go to step #3.
There are a total of 16 pages.
(3) Select the “SCENE” button where you wish to record to. The selected Scene LED
will flash repeatedly. For example, if you are on Page #01 and you select Scene #1,
the green LED above the #1 Scene button will flash repeatedly and your LCD will
display the following:
EDIT SCENE1/PG01
SAVE ESC PAGE01