DMX OPERATOR PRO
29
7.8.1 Add Par Can Chase steps (Cont.)
(7) Press the “PAGE” button one (1) time then press the “DOWN” button one (1) time.
(8) Press the “DEL” button one (1) time to erase the temporary step.
(9) To delete additional steps, repeat steps 3 thru 8. Press “ESC” two (2) times to exit.
7.8.2 Delete Moving Light Chase steps
(1) Press and hold down the "RECORD" button for three (3) seconds or until the green
LED next to the RECORD button comes ON. The LCD will display the following:
SELECT A SCENE
OR CHASE! PAGE01
(2) Select the “CHASE” button 1-6, that you wish to delete st eps out of. The selected
CHASE LED will flash repeatedly. For example, if you select CHASE #1, the LED
above the #1 CHASE button will flash repeatedly and your LCD will display the
following:
EDIT CHASE1/TLXX
ADD ESC STEP00
• TLXX = Total Chase steps.
(3) Press the “PAGE” button so that the LED above its button goes OFF. Use the “UP”
and “DOWN” buttons to scroll through your Chase steps. Stop at the step that you
wish to delete.
(4) Press the “DEL” button one (1) time. All LED’s momentarily flash and your Chase
step will decline by one. The step has been deleted. To delete additional steps,
repeat steps 3 & 4.
(5) Press “ESC” two (2) times to exit.