Manuals / Brands / TV and Video / TV Cables / Elation Professional / TV and Video / TV Cables

Elation Professional 3.0 24-004-1262 Section: 8 Menu Options Set Up

1 40

Download 40 pages, 387.9 Kb

DMX OPERATOR PRO

31

Section: 8 Menu Options Set Up

8.1 Access Menu Options

(1) Press and hold down the "SETUP" button for three (3) seconds or until the green

LED above the SETUP button comes on. The LCD will display the following with a

cursor box flashing over the # 1 option. Once you are here, you can use the “UP” and

“DOWN” buttons to scroll through the menu options.

1. CF CARD ↓

2. ASSIGN CH.

• Menu options include 1. CF CARD, 2. ASSIGN CH., 3. P/T FADE ONLY, 4. DISPLAY MODE,

5. MIDI CH.

8.2 Save to CF Card

(1) Press and hold down the "SETUP" button for three (3) seconds or until the green

LED above the SETUP button comes on. The LCD will display the following with a

cursor box flashing over the # 1 option.

1. CF CARD ↓

2. ASSIGN CH.

(2) Press the "RECORD" button one (1) time so to enter the CF CARD option. The LCD

will display the following with the cursor box now flashing over the # 1 option- “READ

FROM CF”.

1. READ FROM CF

2. STORE TO CF

(3) Press the "DOWN" button one (1) time so the cursor is now flashing over the # 2

option, “STORE TO CF”, and press “RECORD” to enter. The LCD will display the

following:

SETTING

OK ESC UP DOWN

Contents

Main DMX OPERATOR PRO USER MANUAL DMX OPERATOR PRO Table of Contents Sections: DMX OPERATOR PRO Table of Contents (Cont.) Section 1: General introduction Section: 2 Safety Information & Maintenance DMX OPERATOR PRO Section: 3 Information Notice Product Modification Warning: Updates & Changes: Copyright: Section: 5 Technical Specifications Section: 6 Basic Control Parts Section: 6 Basic Control Parts (Cont.) DMX OPERATOR PRO Section: 6 Basic Control Parts (Cont.) 6.2 Rear panel DMX OPERATOR PRO Section: 7 Set Up 7.1 Connections (4) In a daisy chain manner, continue to connect the remainder of your moving lights and DMX OPERATOR PRO 7.1.1 Setting DMX Address Channels for Moving Lights (5) Continue to address the remainder of your fixtures according to the chart below. DMX OPERATOR PRO 7.1.2 Setting DMX Address Channels for Dimmer Packs (Par Cans) 7.2 Assign Joystick to Pan & Tilt DMX OPERATOR PRO Page DMX OPERATOR PRO 7.3 Recording Moving Lights 7.3.1 Record a Moving Light Scene DMX OPERATOR PRO 7.3.1 Record a Moving Light Scene (Cont.) DMX OPERATOR PRO 7.3.2 Record a Moving Light Show DMX OPERATOR PRO 7.3.2 Record a Moving Light Show (Cont.) DMX OPERATOR PRO 7.4 Playback Moving Light Scenes and Shows 7.4.1 Playback Moving Light Scenes DMX OPERATOR PRO 7.4.2 Playback Moving Light Shows DMX OPERATOR PRO 7.5 Edit Moving Light Shows 7.5.1 Add Moving Light Show steps DMX OPERATOR PRO 7.5.1 Add Moving Light Show steps (Cont.) 7.5.2 Delete Moving Light Show steps DMX OPERATOR PRO 7.5.3 Delete Moving Light Shows DMX OPERATOR PRO 7.6 Recording Par Can Scenes and Chases 7.6.1 Record a Par Can Scene DMX OPERATOR PRO 7.6.1 Record a Par Can Scene (Cont.) 7.6.2 DMX OPERATOR PRO 7.6.2 Record a Par Can Chase (Cont.) DMX OPERATOR PRO 7.7 Playback Par Can Scenes and Chases 7.7.1 Playback Par Can Scenes DMX OPERATOR PRO 7.7.2 Playback Par Can Chases DMX OPERATOR PRO 7.8 Edit a Par Can Chase 7.8.1 Add Par Can Chase steps DMX OPERATOR PRO 7.8.1 Add Par Can Chase steps (Cont.) 7.8.2 Delete Moving Light Chase steps DMX OPERATOR PRO 7.8.3 Delete a Par Can Chase DMX OPERATOR PRO Section: 8 Menu Options Set Up 8.1 Access Menu Options 8.2 Save to CF Card Page Page 8.4 Channel Patch 8.4 Channel Patch (Cont.) 8.5 Pan / Tilt Fade Set Up 8.5 Pan / Tilt Fade Set Up (Cont.) 8.6 Display Mode Set Up 8.6 Display Mode Set Up (Cont.) 8.7 MIDI Channel Set Up Section: 9 MIDI Trigger Chart Section: 10 CF Card Important Notice