Elation Professional 3.0 24-004-1262 Section: 5 Technical Specifications , Section: 6 Basic Control Parts

DMX OPERATOR PRO
6
Section: 5 Technical Specifications
• Model………………………………….DMX OPERATOR PRO
• Power Input…………………………..DC 9~15V, 600 mA min.
• LCD……………………………………2×16 characters
• Audio Trigger…………………………Built-in microphone or line in
• DMX Output…………………….…….3 PIN female DMX connector
• Dimensions…………………………...7” (L) × 3.15” (H) × 19” (W)
• Weight…………………………………14 lbs.
Section: 6 Basic Control Parts
6.1 Front panel
• SCENE buttons:
The Scene buttons are used to playback or store Scenes for Moving Lights and Par Cans.
• SHOW button (Moving Light Section):
This Show button is used to playback or store Shows for Moving Lights.
• Chase button (Par Can Section):
This button is used to playback or store Chases for Par Cans.
• FIXTURE buttons:
The Fixture buttons are used to select moving lights when recording Scenes and Shows or for
manual control.
• DIMMER faders:
The Dimmer faders (channels 129 thru 136) are used to adjust relevant dimming level for each
channel.
• PAGE button:
The Page button is used when selecting between pages for relevant Scenes, Chases and
Shows.
• STEP / MIX / SEQ button:
Used to manually trigger Show steps or switch between the Mix and Sequence mode Show
playback for moving lights.
• TAP SYNC button:
There are two (2) of these buttons that temporarily override the Show and Chase speed rate. Tap
on the button two times to enable and override originally set speeds.
• AUDIO button:
The Audio button will activate the internal microphone or a line level input for music
synchronization when Chases or Shows are played back.