Design Spot 300 Pro™
©Elation Professional, Los Angeles Ca. 29 www.ElationLighting.com
Dimmer Speed – This function changes the functionality of the dimmer shutters
from a slower speed to a faster speed. This function is set to “Slow” as default to
support and match the slower speed of the first generation Design Spots. If this
fixture will not be mixed with older generation Design Spots this setting may be
changed to quick to allow for more dramatic dimmer operation.
Feedback – This function turns the feedback correction on or off. This function is set
to “ON” as default. This function allows for automatic pan and tilt correction in the
event either one disrupted during normal operation.
Movement Speed – This function changes the speed function of the Pan and Tilt
motors. Use this function intergrading Design Spot 300 Pro into lighting rigs that
included Design Spot 250s. There are 3 different mode variations;
Speed 1 (Default): Slower than the original Design Spot 250 for smoother, more
precise movements.
Speed 2: Pan and Tilt speeds are identical to the first generation Design Spot
250.
Speed 3: includes a faster Pan speed. Pan speed is 0.5 seconds faster than
original DS-250. Tilt speed will be the same as speed 2.
Mic Sensitivity – This function makes the internal microphone more or less
sensitive to sound. This function only works in conjunction with the sound active
modes. The default setting is 70% and setting range from 0% to 99%.
8.4.2 Service Settings – These adjustments and settings should only be performed by
a technician familiar with the functionality of professional lighting fixtures. Incorrect
setting of these functions may result reduced performance or damage to the fixture.
Service Password: The correct password must be entered before attempting wheel
calibration, changing fan voltage, or changing the gobo speed.
Fan Voltage: This function will change the fan voltage from either “Low” or “High.”