Elation Professional 300 PRO - page 52

Design Spot 300 Pro™
©Elation Professional, Los Angeles Ca. 52 www.ElationLighting.com
driver circuit on the main PCB). The Iris motor is not located in the default position after the
reset.
Zoom error:
(Zoom motor error) This message will appear after the reset of the fixture if the yoke’s
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the
stepping-motor is defective (or its driving IC on the main PCB). The Step-less Zoom is not
located in the default position after the reset.