Electro-Voice P3000RL owner manual Bridged Mode, Limiter, Rear View

REAR VIEW

LIMITER

BRIDGED MODE

The integrated limiter provides reliable protection against signal clipping and has a switchable time constant. Leaving the switch set to SLOW is recommended for general use (factory pre-set status).

When using the power amplifier as Mid/Hi power amp employed in active multi-way systems, setting the limiter switch to FAST is recommended. When using the power amplifier as low-frequency woofer power amp employed in active multi-way systems, setting the limiter switch to SLOW is recommended.

Switch for changing from normal (stereo) operation to bridged mode. In bridged mode the integrated power amplifiers operate in „push-pull“ operation. The output voltages of cannel „A“ and channel „B“ are doubled and present at the BRIDGED OUT connector. Channels „A“ and „B“ work phase-shifted in push-pull operation and may not be used as loudspeaker outputs.

10