DESCRIPTION

Congratulations! With buying an Electro-Voice PRECISION SERIES power amplifier you have chosen an appliance that employs the most advanced technology.

P-Series power amps combine outstanding audio performance, highest reliability and operational stability. Each power amplifier employs an RCM-24 Remote Control module allowing centralized configuration, control and monitoring of all relevant power amp parameters (like output current, output voltage, load impedance, etc.).

The gapless protection circuitry concept not only prevents the power amp itself but also the connected loudspeaker systems from being damaged. These extensive protections include Dynamic Audio Limiters, DC/HF-Protections, Back-EMF-Protection, Inrush Current Limiter, Short Circuit Protection and of course Thermal Overload Protection for the output transistors and mains transformers.

Three-speed high performance fans guarantee outstanding thermal stability at absolute low running noise. The ventilation is directed front-to-rear allowing trouble-free operation even in smaller amp-racks.

Comprehensively dimensioned power supply units with low-leakage toroidal transformers provide extensive headroom far above the stated nominal power.

Mechanical construction and workmanship also comply with the highest precision manufacturing standards. The rigid sheet steel chassis resists even the most wearing tour operation.

The RCM-24 provides full-size overview of the system’s entire status

and control over all relevant system parameters at any time. The RCM- 24 module allows integration into a

Remote Control Network consisting of up to 250 power amps. The Windows Software IRIS – Intelligent Remote & Integrated Supervision – allows controlling and monitoring an entire PA-system from a single or several PCs. Any operational status like initial power-on status, temperature, modulation, limiting, activation of protections, deviation in the load impedance, etc., are centrally registered and displayed, which provides the opportunity to take specific measures prior to the occurrence of critical operational states. Programming an automatic response for exceeding or falling below specific limits is possible as well. All parameters, e.g. power-on/off, levels, muting, filters, etc. can be controlled in real- time and saved in any power amp.

Monitoring the connected loudspeaker systems is performed through measuring output currents and –voltages of the two power amplifier channels. Each time the signal falls below or exceeds set limit values is immediately indicated and logged, thus detecting and indicating short circuits and line interruption during normal operation. The integrated impedance test function allows more precise checking the connected loudspeaker systems. The integrated signal generator is employed together with the current/voltage testing to measure the connected loudspeakers’ and cable’s impedance plus over the entire frequency range. The resulting impedance graph is displayed on the PC-screen. Comparing the measured impedance progression to a reference value is possible at all times, which allows recognizing even the slightest loudspeaker defects or irregularities.

4

Page 3 Page 5
Page 4
Image 4
Electro-Voice P900RL, P1200RL owner manual Description
Page 3 Page 5

P1200RL, P900RL specifications

Electro-Voice P900RL and P1200RL are high-performance power amplifiers designed for various audio applications, including live sound reinforcement, installations, and studio settings. These amplifiers stand out in the market due to their innovative technologies and robust features, making them suitable for both professional audio engineers and audio enthusiasts.

The P900RL model delivers a powerful 900 watts per channel at 4 ohms, while the P1200RL offers an even more impressive output of 1200 watts per channel at the same impedance. This significant power enables these amplifiers to drive a wide range of loudspeakers proficiently, ensuring clean and dynamic sound reproduction with minimal distortion.

One of the key features of the P900RL and P1200RL is their efficient Class H topology. This technology improves energy efficiency by maintaining high power output with less heat. Class H amplifiers dynamically adjust their power supply voltage according to the input signal, resulting in reduced power consumption and increased longevity of the components. This makes the P series amplifiers not only powerful but also environmentally friendly.

Both models come equipped with a built-in limiter and comprehensive protection circuitry to prevent damage from overheating, short circuits, and overloading, ensuring safety and reliability in demanding environments. Additionally, the amplifiers feature a tri-mode operation, enabling them to be configured for stereo, parallel, or bridged mono setups, providing versatility for various audio applications.

The P900RL and P1200RL also include advanced signal processing capabilities, including a variable low pass filter for enhanced sound control and clarity. The integrated cooling system maintains optimal operating temperatures, allowing for extended use without the risk of thermal issues.

Audio connectivity is straightforward with both XLR and ΒΌ-inch TRS inputs, allowing the amplifiers to interface with a variety of audio sources. The professional-grade output connectors ensure secure and reliable connections to speakers, critical for live sound applications.

In conclusion, the Electro-Voice P900RL and P1200RL amplifiers offer a compelling combination of power, efficiency, and versatility. With their advanced technologies and protective features, they cater to the demanding needs of sound professionals while delivering high-quality audio performance suitable for any occasion.
Top Page Image Contents