USA

5938 035 01

End - End of a cycle or function.

FILL - Boiler filling. (Ensure water supply tap/cock are open). Hold - Cooking option, HOLD function active.

LOAd - Place the food in the oven. oPEn - Boiler discharge valve opening.

PrEH - (TIME TM / PRB DISPLAY)Boiler preheating.

PrEH -(COMPARTMENT TEMP. DISPLAY TS) Automatic compartment preheating.

Soap - Detergent. Spray a suitable product on the surfaces to be cleaned as indicated in point 4) of the semiautomatic chamber cleaning cycle (see par. 7. CARE AND MAINTENANCE).

StArt - Press the START button to start the program.

Stby - CLEANING SYSTEM cleaning standby time.

ERROR codes

Codes indicating the need to call technical service

EH2O - Water supply pressure too low for CLEANING SYSTEM (pressure requirements from 1.5 to 2.5 bar)

EFUN - Fan automatic reset thermal switch device. UP appears on the small DISPLAY with reference to the single fan (6-10 GN) or upper fan (20 GN) of the chamber and DO in reference to the lower fan (only 20 GN).

E—-- Non-compliance with a parameter requirement (number of parameter appears in place of dashes “—”).

EPt1 - Chamber sensor interrupted or short-circuited.

EPt2 - Boiler sensor interrupted or short-circuited.

EPt3 - Probe sensor interrupted or short-circuited.

EPt4 - Bypass sensor interrupted or short-circuited.

EPt8 - Electronic controller temperature sensor damaged.

ESCH - Malfunction of commands control circuit cooling devices.

Etub - Boiler overtemperature (257°F)(125°C) warning.

Etuc - Chamber overtemperature (608°F)(320°C) warning.

EFLP - Fault in chamber steam discharge motor-operated valve.

ETC - Tripping of chamber temperature limiter.

ETB - Tripping of boiler temperature limiter.

IMPORTANT!

If an error code is displayed during a cooking cycle, the oven emits a continuous audible warning signal and the cooking cycle is interrupted.

In this case the oven can be used only in cooking modes that do not involve the conditions that generated the error. Notify your Technical Service Center of the alarm code displayed.

6. SWITCHING OFF IN THE EVENT OF A FAULT

If the appliance malfunctions, switch off as follows:

Disconnect the main circuit breaker of the appliance and close the water valve.

Contact your authorized service company to perform maintenance and repairs.

7. CARE AND MAINTENANCE

At the end of each day clean the oven interior with an oven cleaner, following the product supplier's directions.

Do not wash the appliance with water jets.

Do not clean steel surfaces with products containing chlorine (bleach, hydrochloric acid etc.) even diluted.

Do not use corrosive substances (e.g. muriatic acid) to clean the floor under the appliance.

The appliance has an automatic compartment cleaning programme called CLEANING SYSTEM; for its use see par. 1.4.3 USING PRESTORED PROGRAMMES for LEVEL A, whereas for LEVEL B and C see below.

The CLEANING SYSTEM program uses detergent and rinse aid. Therefore, fill the DETERGENT container - max. 5 litres (on the RIGHT with RED cap) and the RINSE AID container - max. 1,2 litres (on the LEFT with BLUE cap) located under the control panel:

RINSE AID

_______________ __________DETERGENT

max. 1,2 litres

max. 5 litres

Use the following cleaning products:

-ECOLAB "Oven Cleaner Power" detergent (not in Gel).

-ECOLAB "Oven Rinse Power" rinse aid (not in Gel).

NB:

Cleaning of the oven chamber is not ensured if a different type of detergent or rinse aid from that specified above is used.

The oven features a UTILITY to perform a automatic or semiautomatic oven chamber cleaning cycle. Proceed as follows. In the level A oven, carry out the AUTOMATIC cleaning cycle by following the instructions in par. 4.4.6 CLEANING SYSTEM.

----------------- AUTOMATIC (C) -----------------

and SEMIAUTOMATIC (A-C) cycle

1) - Remove any large food remnants using a water jet.

Do not use the spray shower or water jets to quickly cool the compartment and the inside glass of the oven door.

2)- Set the following UTILITY as described in heading 4.3.9

UTILITIES:

3)- Select one of the following wash cycles by turning the knob on the display TS:

CLNT (semiautomatic) (level A-C)

CLN1...2...3...4 (automatic) (level C) only for the description of these cycles see CLEANING SYSTEM in par. 4.4.6.

4)- Press the following button to confirm the selection

27

Page 27
Image 27
Electrolux 260456, 267095, 267090, 267091, 267093 manual Switching OFF in the Event of a Fault, Care and Maintenance, Rinse AID

260462, 267084, 260450, 269091, 269082 specifications

The Electrolux models 260456, 267085, 269093, 269092, and 269095 represent a series of innovative and high-performing appliances that showcase the brand's commitment to quality, efficiency, and user convenience. Each model is designed with unique features that cater to a range of household needs, making them a popular choice among consumers.

One of the standout features across these models is the incorporation of advanced technology that enhances performance while ensuring energy efficiency. For instance, these appliances often utilize Electrolux’s state-of-the-art Energy Saving technology, which optimizes power consumption, resulting in lower utility bills and a reduced environmental footprint.

The design of each model is sleek and modern, with user-friendly controls that allow for easy operation. Many of these appliances include intuitive touch controls and LED displays, ensuring that users can easily select and adjust settings to suit their preferences. The ergonomic design enhances functionality while also complementing contemporary kitchen aesthetics.

Additionally, the Electrolux 260456, 267085, 269093, 269092, and 269095 models feature multiple cooking modes and settings. They are built to accommodate various culinary techniques, such as baking, grilling, and steaming. This versatility makes them suitable for both novice cooks and seasoned chefs looking to experiment in the kitchen.

Another notable characteristic of these Electrolux appliances is the emphasis on hygiene and cleanliness. Many models come equipped with self-cleaning options, which significantly reduce the effort required to maintain the appliance. The innovative materials used in construction also resist stains and odors, ensuring that the kitchen remains fresh and inviting.

Safety features are paramount in these models, with options like automatic shut-off systems and child safety locks, providing peace of mind for families. The reliability and durability of Electrolux products are also well-known, with many appliances designed to withstand years of use without compromising performance.

Overall, the Electrolux 260456, 267085, 269093, 269092, and 269095 encompass a blend of cutting-edge technology, energy efficiency, and user-centric design. They address the needs of modern consumers while ensuring exceptional performance in the kitchen. Whether for everyday cooking or special occasions, these appliances stand out as reliable partners in culinary endeavors. Electrolux continues to lead the way in promoting innovation and quality in home appliances, and these models are a testament to that legacy.