![](/images/backgrounds/56548/56548-3620x1.png)
Setting the Delay Timer
Using the delay timer you can delay the start of a dishwashing cycle for 3, 6 or 9 hours.
1.Press the ON/OFF button.
Press the Delay Timer button repeatedly until the indicator next to the number of hours for which the start of the dishwashing cycle is to be delayed lights up, e. g. 6h, if the cycle is to start in 6 hours.
2.Select dishwashing cycle.
The LED indicator for the programme selected and the indicator next to the number of hours will light up.
The dishwashing cycle will start automatically following a countdown of the hours set.
To change the time delay:
As long as the cycle has not yet started, you can still change the setting by pressing the DELAY TIMER button.
Cancelling the delay timer:
Press the DELAY TIMER button repeatedly until none of the three time displays is lit. The selected dishwashing cycle will begin immediately.
To change a dishwashing cycle
As long as the cycle has not yet started, you can still change the dish- washing cycle. First abort the dishwashing cycle, then
Switching off the dishwasher
Do not switch off the dishwasher until the indicator for the end of the dishwasher cycle is illuminated in the cycle progress display.
With some dishwashing cycles, the drying fan continues to run even after the end of the cycle.
1.Press the ON/OFF button. All display indicators will go out.
2.Turn off the water tap.
1Carefully open the door. Hot steam may escape.
Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for about 15 minutes before removing them. You also get a better drying result.
20