Malfunction

Possible cause

Remedy

 

The tap is blocked or furred

Clean tap.

 

with lime-scale.

 

 

 

The tap is turned off.

Turn the tap on.

 

 

 

The programme indicator for

The filter (where present) in

Clean the filter in the

the selected dishwashing cy-

the threaded hose fitting on

threaded hose fitting.

cle is flashing,

the tap is blocked.

 

the indicator for the end of

 

Press the button for the

the dishwashing cycle is

 

dishwashing cycle that

flashing in rhythm 1 short

 

has started;

light signal with approx. 3

Filters in the base of the

then abort the dish-

second pause in-between:

washing compartment are

washing cycle (see sec-

There is no water entering

blocked.

tion: Starting a

the dishwasher.

 

dishwashing cycle);

 

 

clean filters (see section:

 

 

Cleaning the filters).

 

 

 

 

Water inflow hose has not

Check hose installation.

 

been correctly positioned.

 

 

The programme indicator for

The sink outlet is blocked.

Clean out sink outlet.

the selected dishwashing cy-

 

 

 

 

cle is flashing,

 

 

the indicator for the end of

Water drain hose has not

 

the dishwashing cycle is

Check hose installation.

flashing in rhythm 2 short

been correctly positioned.

 

light signals one after anoth-

 

 

er.

 

 

the indicator for the end of

 

Turn off the tap and

the dishwashing cycle is

The anti-flood system has

flashing in rhythm 3 short

contact the Customer

been triggered.

light signals one after anoth-

Care department.

er.

 

 

 

The mains plug is not

Plug in mains plug.

 

plugged in.

 

 

 

A fuse in the house’s wiring

Replace fuse.

The cycle is not starting.

system is defective.

 

 

 

 

For dishwasher models with

If the dishes are to be

 

a delay start timer:

 

washed immediately,

 

A start time has been select-

 

cancel the delay start.

 

ed.

 

23