Anti-flood system
For protection from water damage, the dishwasher is equipped with a
In the event of a fault, the safety valve in the water inlet hose immediately interrupts the supply of water to the appliance and the drain pump is activated. In this way water can neither escape nor overflow. The remaining water in the appliance is automatically pumped out.
Electrical Connection
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
1 WARNING - This appliance must be earthed.
The manufacturer declines any responsibility should these safety measures not be observed.
Before switching on make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
To isolate the dishwasher from the mains, remove the mains plug. Important: The plug must still be accessible after the appliance has been installed.
Changing a fuse
The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS 1363A) fuse must be used.
Should the plug need to be replaced | Green & Yellow | |
for any reason, proceed as described |
| |
below. |
|
|
The wires on the mains lead are col- |
| |
oured in accordance with the fol- |
| |
lowing code. | Blue |
|
| Brown | |
Green and Yellow: Earth |
| |
Blue: | Neutral |
|
Brown: | Live |
|
Cord Clamp
•The wire coloured green and yellow must be connected to the termi-
nal marked with the letter “E“ or by the earth symbol 
or coloured green and yellow.
32