Installing the dishwasher
•The dishwasher must be installed on a firm floor and adjusted to en- sure that it is stable and level in all directions.
• To compensate for unevenness in the floor and to match the height of the appliance to that of surrounding units, extend the threaded feet using a screwdriver.
•Adjust the rear feet of the appli- ance using a cordless screwdriver from the front of the appliance. (See installation instructions.)
•The drain hose, inlet hose and mains cable must be laid so that they are able to move freely within the plinth area, and so that they
are not kinked or crushed when the dishwasher is in position.
•The dishwasher must also be screwed tightly to the work surface or to the adjoining units. This is essential to ensure the dishwasher does not tip up.
Dishwashers that can be integrated
(see installation template supplied)
3 The door of the appliance can be fitted with a wooden door/cupboard door with the following dimensions:
Width: | 591 – 594 mm |
|
Depth: | 16 – 24 mm |
|
Height: | dependent on | – Recess height |
(variable) |
| – Plinth height |
|
| – Adjusting the dishwasher to match the height of |
|
| adjoining units |
|
| The exact height must be measured at the place of in- |
|
| stallation from the adjoining units. |
|
|
|
Weight: | max. 8 kg |
|
|
|
|
29