Electrolux 50550 Performing a Wash Cycle

Instructions for use

Performing a Wash Cycle

Brief guide

A wash cycle consists of the following steps:

1. Open the door and load the washing.

2. Close the door.

3. Add detergent/additives.

4. Set the appropriate wash programme:

–Set the programme and temperature using the programme knob

–Set additional programme functions as required.

5. Change the Spin Speed/press RINSE HOLD (ARRET CUVE PLEINE, SPOEL-

STOP) as necessary.

6. Start the wash programme by pressing the START/PAUSE (MARCHE/

PAUSE, START/PAUZE) button.

After the wash programme is complete:

Important! If the wash cycle was stopped with Rinse Hold, select

DRAIN (VIDANGE/POMPEN) or SPIN (ESSORAGE/CENTRIFUG.) before

opening the door.

7. Open the door and take out the washing.

The door can be opened after the DOOR (PORTE/DEUR) light goes off

and the END (FIN/ENDE) light has come on.

8. Switch off the washing machine: Turn the programme knob to OFF

(ARRET/UIT).

Contents

Main Dear customer, 1 3 2 Contents Instructions for use Setting up and connection instructions . . . . . . . . . . . . . . . . . 41 Page Instructions for use 1 Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2 Disposal 2 Environment Tips Unit Description Front View Drawer for Detergent and Conditioners Control Panel Programme Knob 3 Programme Option Buttons 3 Consumption values and programme times Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Types of washing and care symbols Detergent and Conditioners Which detergent and conditioner? How much detergent and conditioner? 2 Water Softener Performing a Wash Cycle Brief guide Opening and Closing the Door 3 Add the Washing 3 Adding detergent/conditioners 3 Setting the washing programme 3 Changing Spin Speed/Selecting RINSE HOLD (ARRET CUVE PLEINE, SPOELSTOP) 3 Setting the delay timer 3 Starting the Wash Programme 3 Wash Programme Progress Changing the washing programme 3 End of Wash Cycle/Removing the Washing Programme Tables Washing Separate Rinsing Separate Spinning Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door What to do if ... Remedying Faults Page Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Drain pump 1 Page Additional rinse cycles (RINSE+/RINCAGE+, SPOELEN+) 3 Child Safety Feature 1 Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove the Transport Safeguard 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Guarantee conditions Guarantee conditions Belgium Guarantee conditions Customer services Customer services Belgium Page Index Service