Electrolux 50550 3

Instructions for use

24

Changing the washing programme

Changing or cancelling the programme

0 1.Press the button START/PAUSE (MARCHE/PAUSE, START/PAUZE).

2. Turn the programme selector to OFF (ARRET/UIT). The washing pro-

gramme is cancelled.

3. Set another washing programme, if required.

Otherwise, turn the programme selector to DRAIN (VIDANGE/POMPEN)

or SPIN (ESSORAGE/CENTRIFUG.) and press the START/PAUSE (MAR-

CHE/PAUSE, START/PAUZE) button.

(The water is drained or the washing is spun.)

3 The washing programme can be temporarily interrupted at any time

by pressing the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button.

It is then re-started by pressing the button again. A washing pro-

gramme can only be changed after the programme selector has been

turned to OFF (ARRET/UIT).

Selecting a programme option

The programme option TIME SAVING (COURT/KORT) can still be selected

after the programme has started.

0 1.Press the button START/PAUSE (MARCHE/PAUSE, START/PAUZE).

2. Press the button TIME SAVING (COURT/KORT).

3. Press the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button. The

washing programme continues.

Changing the Spin Speed

The Spin Speed can still be changed or RINSE HOLD (ARRET CUVE

PLEINE/SPOELSTOP) set, while the programme is running.

0 1.Press the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button.

2. Change the spin speed with the Spin Speed/RINSE HOLD (ARRET CUVE

PLEINE/SPOELSTOP) button.

3. Press the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button again.

The washing programme continues.

Contents

Main Dear customer, 1 3 2 Contents Instructions for use Setting up and connection instructions . . . . . . . . . . . . . . . . . 41 Page Instructions for use 1 Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2 Disposal 2 Environment Tips Unit Description Front View Drawer for Detergent and Conditioners Control Panel Programme Knob 3 Programme Option Buttons 3 Consumption values and programme times Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Types of washing and care symbols Detergent and Conditioners Which detergent and conditioner? How much detergent and conditioner? 2 Water Softener Performing a Wash Cycle Brief guide Opening and Closing the Door 3 Add the Washing 3 Adding detergent/conditioners 3 Setting the washing programme 3 Changing Spin Speed/Selecting RINSE HOLD (ARRET CUVE PLEINE, SPOELSTOP) 3 Setting the delay timer 3 Starting the Wash Programme 3 Wash Programme Progress Changing the washing programme 3 End of Wash Cycle/Removing the Washing Programme Tables Washing Separate Rinsing Separate Spinning Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door What to do if ... Remedying Faults Page Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Drain pump 1 Page Additional rinse cycles (RINSE+/RINCAGE+, SPOELEN+) 3 Child Safety Feature 1 Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove the Transport Safeguard 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Guarantee conditions Guarantee conditions Belgium Guarantee conditions Customer services Customer services Belgium Page Index Service