Adding detergent/conditioners | Electrolux 50550 manual

Instructions for use

Adding detergent/conditioners

3	For instructions concerning detergent and conditioners, see Section
	"Detergents and conditioners“.

01. Open the detergent dispenser drawer:

press the flap on the drawer so as to be able to grasp the handle (1), and pull out the drawer (2).

2.Add the detergent/conditioners.

Compartment for main wash powder detergents

(If you use a water softener and need the right-hand compartment for the pre-wash/soaking agent, add the water softener to the left-hand compartment with the main wash detergent.)

Compartment for liquid conditioners

(softeners, finishers, starch) Important! Do not fill the compart-

ment past the MAX mark. If required,

dilute concentrated fluids up to the MAX mark, dissolve powdered starches.

Note: A small amount of water remaining in the liquid conditioner compartment is normal and does not affect rinse results.

Compartment for Pre-wash detergent or in-wash stain treatment products

For the PRE-WASH (PRELAVAGE/VOORWAS) programme option only. or for water softener

3.Push the drawer in fully.

3 If using liquid detergents/tablets:

Add liquid detergent or tablets using the dosage container provided by the detergent manufacturer. Follow the instructions on the detergent packaging.

20

Image 20

Electrolux 50550 manual Adding detergent/conditioners, Detergents and conditioners, If using liquid detergents/tablets

Contents

Lavamat 50550 Electronic Dear customer Contents Setting up and connection instructions What to do ifPage Safety Instructions for useBefore Putting into Operation for the First Time Correct Use Child Safety General Safety Disposal Dispose the packing materialFor polyoxymethylene, e.g. plastic clips Dispose the old appliance Environment Tips Drawer for Detergent and Conditioners Unit DescriptionFront View Main wash cycle for Cottons/Linen from 30 C to 95 C Control PanelProgramme Knob Main wash programme for Delicates at 30 C or 40 C WOOL/SILK LAINE/SOIE, WOL/ZIJDE P HandwashRinses, liquid additive washed in from compartment æ, spin Draining of the water after a Rinse Hold without spinning Programme Option Buttons Shorter washing cycle for slightly dirty washing Pull out the washing powder drawer slightly Consumption values and programme timesBefore the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Types of washing and care symbols Water Softener Detergent and Conditioners Which detergent and conditioner?How much detergent and conditioner? After the wash programme is complete Performing a Wash CycleBrief guide Opening and Closing the Door Add the WashingLight indicate whether the door can be opened Again Detergents and conditioners If using liquid detergents/tabletsAdding detergent/conditioners Setting the washing programme For the appropriate pro According to the wash programme To change the Spin Speed for the final rinse orPLEINE, Spoelstop comes on Setting the delay timer Starting the Wash ProgrammeWash Programme Progress Programme Progress Display Changing or cancelling the programme Changing the washing programmeWater is drained or the washing is spun Selecting a programme option End of Wash Cycle/Removing the Washing After a Rinse Hold, the water must first be drained Programme Tables Washing Separate Rinsing Separate Spinning Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Remedying Faults What to do if Transit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation When all the washing solution has drained off Housing foreign objects are protected by the pump wheelBefore cleaning the drain pump Drain pump Instructions for use To cancel the additional rinse cycles Additional rinse cycles RINSE+/RINCAGE+, SPOELEN+Helpful to rinse with extra water To set the additional rinse cycles Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit Remove the Transport SafeguardTransporting the Unit Tures Special button a and the plug caps B 2 ea. and C 1 ea. are Supplied with the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Technical Data DimensionsDelivery Heads over 1m Measurements in mm Guarantee conditions Belgium Guarantee conditions Customer services Tel FaxPage Index Additives Service When do you incur costs even during the warranty period? AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG