Drain pump, Before cleaning the drain pump | Electrolux 50550

Instructions for use

When all the washing solution has drained off:

6.Firmly push the plug into the emergency emptying hose and turn it tight clockwise.

7.Put the emergency emptying hose back into the holder.

8.Insert the flap into the base panel and close.

Drain pump

	The drain pump is maintainance-free. The cover of the drain pump is
	required to be opened only in the event of a malfunction when no
	more water is being pumped out, e.g. if the pump wheel is blocked.
	Before loading the machine, please always ensure that there are no for-
	eign objects present in the pockets or inbetween the items to be
	washed. Paper clips, nails etc. which may find their way into the wash-
	ing machine along with the washing will remain in the drain pump
	housing (foreign objects are protected by the pump wheel).
	To restart the drain pump when it is blocked, please proceed as follows:
1	Warning! Switch off the washing machine and remove the mains plug
	before cleaning the drain pump!

01. First carry out an emergency emptying procedure (see section “Carrying out emergency emptying”).

2.Place a cloth on the floor in front of the cover of the drain pump. Residual water may run out.

3. Unscrew the drain pump cover in an anti-clockwise motion and pull it out.

4. Remove any foreign objects and fabric lint from the pump housing and from the pump wheel.

37

Image 37

Electrolux 50550 manual Drain pump, When all the washing solution has drained off, Before cleaning the drain pump

Contents

Lavamat 50550 Electronic Dear customer Contents What to do if Setting up and connection instructionsPage Instructions for use SafetyBefore Putting into Operation for the First Time Correct Use General Safety Child Safety Dispose the packing material DisposalFor polyoxymethylene, e.g. plastic clips Dispose the old appliance Environment Tips Front View Unit DescriptionDrawer for Detergent and Conditioners Programme Knob Control PanelMain wash cycle for Cottons/Linen from 30 C to 95 C WOOL/SILK LAINE/SOIE, WOL/ZIJDE P Handwash Main wash programme for Delicates at 30 C or 40 CRinses, liquid additive washed in from compartment æ, spin Draining of the water after a Rinse Hold without spinning Shorter washing cycle for slightly dirty washing Programme Option Buttons Before the First Wash Consumption values and programme timesPull out the washing powder drawer slightly Sort and Prepare the Washing Prepare the Washing Cycle Types of washing and care symbols How much detergent and conditioner? Detergent and Conditioners Which detergent and conditioner?Water Softener Brief guide Performing a Wash CycleAfter the wash programme is complete Add the Washing Opening and Closing the DoorLight indicate whether the door can be opened Again Adding detergent/conditioners If using liquid detergents/tabletsDetergents and conditioners For the appropriate pro Setting the washing programme PLEINE, Spoelstop comes on To change the Spin Speed for the final rinse orAccording to the wash programme Starting the Wash Programme Setting the delay timerWash Programme Progress Programme Progress Display Changing the washing programme Changing or cancelling the programmeWater is drained or the washing is spun Selecting a programme option After a Rinse Hold, the water must first be drained End of Wash Cycle/Removing the Washing Washing Programme Tables Separate Spinning Separate Rinsing Washing Detergent Drawer Cleaning and Care Filling Door Washing Drum What to do if Remedying Faults Transit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Housing foreign objects are protected by the pump wheel When all the washing solution has drained offBefore cleaning the drain pump Drain pump Instructions for use Additional rinse cycles RINSE+/RINCAGE+, SPOELEN+ To cancel the additional rinse cyclesHelpful to rinse with extra water To set the additional rinse cycles Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting up and connection instructions Remove the Transport Safeguard Setting Up the UnitTransporting the Unit Tures Supplied with the unit Special button a and the plug caps B 2 ea. and C 1 ea. are Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Measurements in mm Belgium Guarantee conditions Guarantee conditions Tel Fax Customer servicesPage Additives Index When do you incur costs even during the warranty period? Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG