Instructions for use

 

 

 

 

 

Problem

Possible Cause

Remedy

 

 

 

 

First turn the programme se-

 

 

The END (FIN/EINDE)

The programme selector has

lector to OFF (ARRET/UIT),

 

 

indicator flashes

not clicked into place cor-

then set the desired pro-

 

 

8 times.

rectly.

gramme to the exact posi-

 

 

 

 

tion.

 

 

 

 

Remove the transit bolts/bars

 

 

 

The transit bolt/bars were

as described in the

 

 

 

not removed.

Installation and Connection

 

 

 

 

instructions.

 

 

 

The height-adjustable screw

Adjust the screw feet as de-

 

 

 

feet have not been set

scribed in the Installation

 

 

 

correctly.

and Connection instructions.

 

 

The washing machine

There is very little washing in

Operation is not affected by

 

 

vibrates when operat-

 

 

ing or is noisy.

the drum (for example, only

this.

 

 

one bathrobe).

 

 

 

 

 

 

 

 

Check the positioning of the

 

 

 

Water could not be drained

outlet hose and even out any

 

 

 

completely before spinning,

kinks if necessary or clean

 

 

 

because the outlet hose has

the drain pump and remove

 

 

 

got a kink in it or the drain

any foreign matter that

 

 

 

pump is blocked.

might be in the pump hous-

 

 

 

 

ing.

 

 

 

 

 

 

 

The main wash deter-

Probably too much detergent

Follow the manufacturer's

 

 

gent solution produces

instructions exactly, when

 

 

too many suds.

was used.

measuring out detergent.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

31

Page 31
Image 31
Electrolux 50550 manual Transit bolt/bars were As described Not removed