Water Supply Connection

The dishwasher must be plumbed into a cold water supply.

The water pressure must be within the limits given in the technical specifications. Your local Water Authority will advise you on the aver- age mains pressure in your area.

A shut-off device with a ¾" connection must be provided on site.

The inlet hose has a filter to remove any impurities from the water supply and a rubber seal. When fitting ensure that the filter and seal are correctly positioned.

1No water must escape from the fitting after the shut-off device has been opened.

Water Outlet Hose Connection

Ensure the drain hose is not bent or squashed as the could prevent or slow down the discharge of water.

The outlet hose should be connected to a water outlet provided in a neighboring cupboard (not directly behind the unit).

The dishwasher is fitted with a device to prevent the back flow of wa- ter, which allows the installation height of the unit to be above the outlet height.

The highest point of the drain hose should never exceed the unit height.

33

Page 33
Image 33
Electrolux 64570 Vi manual Water Supply Connection, Water Outlet Hose Connection