Setting the Amount of Rinse Aid Required
3 Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfac- tory”.) The dosage can be set from
1.Open the dishwasher door.
2.Press the release button on the rinse
aid compartment.
3. Open the cover.
4.Set the dosage level.
5. Press the lid shut until it clicks into place.
6. If rinse aid has leaked out, wipe it away with a cloth.
Activating/Deactivating the Rinse Aid dispenser
If the 3 in1 button is pressed, you do not need to deactivate the rinse aid dispenser.
1.Press the ON/OFF button.
3 If the LED indicator of only one programme button is illuminated, this wash programme has been activated. The wash programme must be deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds. The LED indicators of all the buttons that can be selected will illumi- nate.
Exception: The 3in1 button will only illuminate if the function has been activated.
2.Press function buttons 2 and 3 simultaneously and hold them down. The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 2.
The LED indicator for function button 2 will flash. The
0d | Rinse aid dispenser is deactivated |
1d | Rinse aid dispenser is activated (factory setting) |
|
|
12
