Editing the tempo map

MR-8 Owner’s Manual

1)While the display shows the tempo map screen, use the [CURSOR /] key to highlight the setting you want to change, then press the [ENTER] key.

The display changes to show the screen where the bar number currently set is highlighted, showing that you can now edit it.

Deleting an unnecessary tempo setting

You can delete an unnecessary tempo setting from the tempo map.

1)On the tempo map screen, use the [CURSOR /] key highlight the tempo setting you want to delete, then press the [ENTER] key.

The display changes to show the screen where the bar number currently set is highlighted, showing that you can now edit it.

2)Use the [CURSOR /] keys to enter a desired bar number.

3)Use the [CURSOR ] key to highlight the beat number currently set.

You can now edit the beat number.

4)Use the [CURSOR /] keys to enter a desired number.

5)Use the [CURSOR ] key to highlight the tempo value currently set.

You can now edit the tempo value.

7)After editing is completed, use the [CURSOR ] key to move the cursor to "[ENTER]" at the lower center of the screen, then press the [ENTER] key.

The new tempo setting above is now effective, while the display changes to show the tempo map screen.

2)Use the [CURSOR ] key to move the cursor to "[DEL]" at the lower right of the screen, then press the [ENTER] key.

The selected setting is immediately deleted and the subsequent settings go up in the list.

The following shows the screen examples for deleting "12bar 1 -> 120bpm".

You can also exit the menu mode by pressing the

[CURSOR ] key as many times as required until exiting the menu mode.

You can also exit the menu mode by pressing the

[CURSOR ] key as many times as required until exiting the menu mode.