Fostex MR-8 owner manual Use the Cursor key to flash 1 for Beat setting

MR-8 Owner’s Manual

2)Use the [CURSOR ] key to highlight

"---bar - -> ---bpm", then press the [ENTER] key.

The display shows the screen for new tempo setting. Initially, the upper "2" for bar number entry flashes. You can enter a numeric value between 1 and 999.

flashing

7) Use the [CURSOR /] keys to enter "180".

flashing

3) Use the [CURSOR /] keys to enter "4".

flashing

flashing

8)Use the [CURSOR ] key to highlight "[ENTER]" at the lower center of the screen, then press the [ENTER] key.

The tempo setting above is completed and the display changes to show the tempo map screen, in which the new setting is reflected.

If you want to cancel the setting, highlight "[CANCEL]" instead of "[ENTER]", then press the [ENTER] key.

4)Use the [CURSOR ] key to flash "1" for "Beat" setting.

You can enter a beat number between 1 and 8.

flashing

5) Use the [CURSOR /] keys to enter "2".

flashing

9)Use the [CURSOR ] key to highlight

"---bar - -> ---bpm", then press the [ENTER] key.

The display shows the screen for new tempo setting as shown in step 2 above. Follow the same procedure as described above until you finish all settings.

6)Use the [CURSOR ] key to flash "120" for "Tempo" setting.

You can enter a tempo value between 30 and 250.

10)After completing all settings, use the [CURSOR ] key to return the display to show the menu selection screen.

Then, in order to use the rhythm guide function, continue to the procedure for click level setting described on page 85.

To edit the tempo map you created, see below.

83