Fostex MR-8 owner manual Editing a song name, After entering the name, move the cursor to

PLAY MODE

A B C 1

MR-8 Owner’s Manual

Editing a song name

You can edit a current song name.

1)Load the desired song of which you are going to edit the song name.

2)While the recorder is stopped, press the [MENU] key to enter the menu mode.

The display shows the menu selection screen, in which "System" is highlighted initially.

5)Use the character entry keys to enter a desired character to the flashing point.

You can move the cursor (flashing point) using the [CURSOR ] and [CURSOR ] keys.

<Character entry keys>

Some keys on the MR-8 top panel act as character entry keys in the menu mode. For example, the [PLAY MODE] key (shown at the left) can be used for entering A, B, C, a, b, c and 1. Each press of a

character entry key switches the character to be entered from among those assigned to the key.

3)Use the [CURSOR ] key to highlight "Song", then press the [ENTER] key.

The display now shows the song edit menu selection screen, in which "Select Song" is highlighted initially.

<Entry example>

To modify a part of the current name, use the [CURSOR ] and [CURSOR ] keys to move the cursor to a character to be changed, and enter a desired character using the appropriate char- acter entry key. If you reenter a new name, move the cursor to the first character of the name, and press the [1-4 > 5/6, 1-6 > 7/8] key repeat- edly until all characters are deleted. Then, en- ter a new song name using the character entry keys. In the screen example below, "Moon_Light" is entered.

<Note>

4)Use the [CURSOR ] key to highlight "Rename Song", then press the [ENTER] key.

The display now shows the song name editing screen, in which the first character of the current song name flashes.

If you carry out step 6 below after entering the same name as an existing song or without enter- ing a name, the display shows "Illegal Song Name!" and returns to the song name editing screen.

Also note that you cannot use “+” for a song name with less than 9 characters. For example, you cannot enter “AAA+BBB” for a song name. You can use “+” for asong name with 8 or more characters. For example, you can enter “AAA+BBBBB”.

6)	After entering the name, move the cursor to
	“[ENTER]” on the screen using the [CURSOR ]
	key, then press the [ENTER] key.
	The display now shows the screen in which
	"Rename Song" is highlighted.
7)	Press the [MENU] key to exit the menu mode.
flashing	The MR-8 exits the menu mode and the display

shows the home screen of the current song.

58