MR-8 Owner’s Manual

Formattingacard

By formatting a card, all recorded data on the card are erased and the card returns to the initial condition, follow the procedure shown below to format the card.

1)Turn off the MR-8.

2)Set the card you are going to format to the slot.

3)Turn on the MR-8.

The display shows the startup screen, then the song is loaded.

4)Press the [MENU] key to enter the menu mode.

The display changes to the menu selection screen, in which "System" is initially highlighted.

5)While "System" is highlighted, press the [ENTER] key.

The display now shows the System menu selection screen, in which "Card Format" is initially highlighted.

6)While "Card Format" is highlighted, press the [ENTER] key.

The display now shows the screen for confirmation before the card format.

In this screen, "Delete All Songs!" and "Can't Undo!" are shown for warning, as well as "Yes-> RECORD+YES key" and "No-> NO key" alternately flash.

<Note>

Once you start formatting, you cannot stop it on the way.

To cancel formatting, press the [CURSOR ] key when the confirmation screen is shown.

7)Press the [CURSOR ] key while holding down the [RECORD] key.

The MR-8 starts formatting. When completed, "Completed!" is shown on the display.

8)Press the [ENTER] key.

The screen exits the "Card Format" menu, and automatically change to the "Select Song" menu for creating a new song (01).

Then, select the song mode and enter the song name to create a new song to the formatted card, following the same procedure as described on page 21.

25

Page 25
Image 25
Fostex MR-8 owner manual Formatting a card, While System is highlighted, press the Enter key, Press the Enter key