Fostex MR-8 owner manual Flashing

MR-8 Owner’s Manual

"Source Track" selects the exchange source track(s), while "Dest.Track" selects the exchange destination track(s).

The current position information is shown at the top of the screen (shown in Bar/Beat base in the screen example below).

flashing

5)Use the [CURSOR /] keys to select the source track(s) to be exchanged.

You can select from among mono tracks (1 through 8) and stereo pair tracks (1/2, 3/4, 5/6 and 7/8).

6)Use the [CURSOR ] key to move the cursor to the option for "Dest.Track".

7)Use the [CURSOR /] keys to select the destination track(s).

If you select a mono track for the exchange source in step 5 above, you can select a mono destination track. If you select stereo pair tracks for the exchange source in step 5 above, you can select stereo pair destination tracks.

<Note>

You cannot select the same track(s) for the exchange source and destination.

8)Use the [CURSOR ] key to move the cursor to "ENTER" on the screen, then press the [ENTER] key.

The display shows "Please Wait!", immediately followed by "Completed!" when the MR-8 completes the exchange operation.

<Note>

If you want to cancel the exchange opera- tion, move the cursor to "[CANCEL]" on the screen, then press the [ENTER] key.

9)Press the [ENTER] key.

The display returns show to the screen in which "Change Track" is highlighted.

10)Press the [MENU] key to exit the menu mode.

<Note>

If you are not satisfied with the result, press the [UNDO/REDO] key to undo the opera- tion (see page 62).

67