Fostex MR-8 owner manual Editing a file name, Press the Enter key

MR-8 Owner’s Manual

When completing the conversion, the screen shows

"Completed!".

3)Press the [ENTER] key.

The MR-8 quits the conversion function and the display returns to the home screen.

<Editing a file name>

You can edit a file name by the following procedure.

1.After selecting the range of track data to be converted, press the [CURSOR ] key to move the cursor to the leftmost position of the file name.

flashing

2.Use the [CURSOR /] keys to move the edit position and enter a new name with the character entry keys.

While the leftmost position is flash- ing, pressing the [1-4>5-6,1-6>7-8]/ [DELETE] key repeatedly deletes the current file name.

3.After entering a new name, use the [CURSOR ] key to move the cursor to "[ENTER]" at the lower right of the screen, then press the [ENTER] key.

The conversion is immediately carried out and then "Completed!" is shown on the display.

<Note>

If you convert data with the same name as previously converted data, the follow- ing screen appears on the display.

This screen warns you that the WAV file with the same name already exists and asks you to carry out the conversion by over- writing the existing file or cancel the con- version.

If you carry out the conversion by over- writing the existing file, use the [CURSOR ] key to move the cursor to "[YES]", then press the [ENTER] key.

If you do not want to overwrite the exist- ing file, use the [CURSOR ] key to move the cursor to "[NO]", then press the [EN- TER] key. The display returns to show the screen for editing the file name, so you can enter a different file name and then carry out the conversion.

If you want to cancel the conversion when the screen above is shown, use the [CUR- SOR ] key to move the cursor to "[NO]" and press the [ENTER] key to show the screen for editing the file name, and then press the [7-8>STEREO WAV FILE] key to quit the conversion function.

87