Fostex MR-8 owner manual Exchange parts between tracks

MR-8 Owner’s Manual

Exchange parts between tracks

You can exchange parts between mono or stereo tracks.

LOCATE A	LOCATE B
point	point
ABS ZERO	REC END

TRK 1

TRK 2

TRK 3

TRK 4

TRK 5

TRK 6

TRK 7

TRK 8

<Note>

You cannot exchange data of a song protected. Release the protection before exchanging data.

1)Load the song you want to edit.

2)Store the LOCATE A and LOCATE B points (see page 53).

You can check the part by playing back between the LOCATE A and LOCATE B points (see page 68).

3)While the recorder is stopped, press the [MENU] key to enter the menu mode.

The display shows the menu selection screen, in which "System" is highlighted initially.

4)Use the [CURSOR ] key to highlight "Part", then press the [ENTER] key.

The display now shows the part edit menu selec- tion screen, in which "Erase Part" is highlighted ini- tially.

5)Use the [CURSOR ] key to highlight "Change Part", then press the [ENTER] key.

The display now shows the screen for selecting the source track(s) and destination track(s) of the exchange operation. "Source Track" selects the exchange source track(s), while "Dest. Track" selects the exchange destination track(s).

flashing

6)Use the [CURSOR /] keys to select the exchange source track(s).

You can select from among mono tracks (1 through 8) and stereo pair tracks (1/2, 3/4, 5/6 and 7/8).

7)Use the [CURSOR ] key to move the cursor to the option for "Dest.Track".

8)Use the [CURSOR /] keys to select the exchange destination track(s).

If you select a mono track for the exchange source in step 6 above, you can select a mono destination track. If you select stereo pair tracks for the exchange source in step 6 above, you can select stereo pair destination tracks.

<Note>

You cannot select the same track(s) for the exchange source and destination.

9)Use the [CURSOR ] key to move the cursor to "[ENTER]" at the lower right on the screen, then press the [ENTER] key.

The display shows "Please Wait!", immediately followed by "Completed!" when the MR-8 completes the part exchange operation.

To cancel the part exchange operation, move the cursor to "[CANCEL]" at the lower left on the screen, then press the [ENTER] key.

75