Fostex MR-8 owner manual Exporting bounced data to a personal computer, Through 4 for recording

MR-8 Owner’s Manual

<Notes on "1-4 > 5/6" mode>

You can bounce tracks in the "1-4 > 5/6" mode in the same manner as the "1-6 > 7/8" mode described above. However, you can monitor the playback sounds of tracks 7/8 (if any sounds are recorded) simultaneously.

Delay

or

Reverb

Trk 1 Playback

Trk 2 Playback

Trk 3 Playback

Trk 4 Playback

Bounce

Trk 5 Record

Trk 6 Record

Trk 7 Playback

Trk 8 Playback

Mixing Mastering effect

STEREO OUT (L, R)

Therefore, during rehearsal and actual track bouncing, faders and level meters act as the following.

Faders	Control the signal levels of tracks 1
1 through 4	through 4 for recording.
Fader 5/6	Controls the monitor levels of tracks 5/6.
Fader 7/8	Controls the monitor levels of tracks 7/8.
[MASTER]	Controls the recording master level of
fader	tracks 5/6.

Meters	Show the playback levels of tracks 1
1 through 4	through 4.
Meter 5/6	Shows the recording level of tracks 5/6.
Meter 7/8	Shows the playback level of tracks 7/8.
Meters	Shows the monitor output levels (STE-
L and R	REO OUT L and R).

<Exporting bounced data to a personal computer>

You can export bounced song data on tracks 7/8 to a personal computer.

The exported data can be used for making an original audio CD via a CD-RW drive connected to the computer, or used with a musical applications on the computer.

To export song data on tracks 7/8 to a personal computer, you must convert the mono WAV files of tracks 7/8 to a stereo WAV file.

See page 86 for details about how to convert mono files to a stereo file. See page 88 for details about how to export song data to a personal computer.

46