Fostex MR-8 owner manual Preparation for recording onto a new card, Correction and deletion

MR-8 Owner’s Manual

<Correction and deletion>

To correct a character entered, use the [CURSOR /] keys to move the cursor to the character you want to correct, and re- enter the desired character.

By moving the cursor to the last character and pressing the [1-4>5/6, 1-6>7/8] key repeatedly, you can delete all characters.

<Note>

You have to enter a song name. If you go to the next operation without entering a song name, the warning message appears and the display shows the song name entry screen. If you enter a song name which is already used in the card, the same warning message ap- pears. You can change a song name whenever you like in the menu mode (see page 58).

12)Highlight “[ENTER]” at the bottom of the screen using the [CURSOR ] key, and press the [ENTER] key.

The screen changes to show the Song menu screen. To cancel creating a song, highlight “[CANCEL]” and press the [ENTER] key in the step above.

13)Press the [MENU] key to quit the menu mode.

To create another song, follow the same procedure above. You can also delete an unnecessary song (see page 59).

Preparation for recording onto a new card

Before recording a material onto a new card (which is operation-confirmed by Fostex), carry out the following procedure for preparation.

<Note>

You can use a card which has been used with a digital camera or personal computer if the card is operation-confirmed. However, de- pending on the use of the card, the remain- ing space for recording with the MR-8 may be small. Therefore, we recommend to format the card by your digital camera or personal computer before using it with the MR-8.

If you cannot format such a card with another device, you can format the card with the MR- 8 using the "Card Format" menu after creat- ing a new song by the following procedure. See page 25 for formatting a card with the MR-8.

1)While the MR-8 power is off, remove the supplied card from the slot and insert a new card to the slot.

2)Turn on the MR-8 power.

After showing the startup screen, the display automatically shows the "Select Song" screen of the Song menu, on which you can create song 01.

As described earlier, set the song mode (Nor- mal or Extended) and song name to create song 01.

After creating a song, you can make recording onto the card.

22