Fostex MR-8 owner manual Copying/pasting whole track data

MR-8 Owner’s Manual

5)Use the [CURSOR /] keys to select a mono track or a pair of stereo tracks to be erased.

You can select from among mono tracks (1 through 8) and stereo pair tracks (1/2, 3/4, 5/6 and 7/8).

6)Use the [CURSOR ] key to move the cursor to "ENTER" on the screen, then press the [ENTER] key.

The display shows "Please Wait!", immediately fol- lowed by "Completed!" when the MR-8 completes erasing.

<Note>

If you want to cancel the erase operation, move the cursor to "CANCEL" on the screen, then press the [ENTER] key.

7)Press the [ENTER] key.

The display returns show to the screen in which "Erase Track" is highlighted.

Copying/pasting whole track data

You can copy whole data (from ABS ZERO to REC END) of the desired mono or stereo track(s) of the song currently loaded and paste it to the other desired track(s). The data on the source (cop- ied) track still remains after the copy/paste op- eration.

ABS ZERO REC END

TRK 1

TRK 2

TRK 3

TRK 4

TRK 5

TRK 6

TRK 7

TRK 8

<Note>

You cannot copy/paste track data of a song protected. Release the protection before copy- ing/pasting track data.

1)Load the song you want to edit.

2)While the recorder is stopped, press the [MENU] key to enter the menu mode.

The display shows the menu selection screen, in which "System" is highlighted initially.

8) Press the [MENU] key to exit the menu mode.

<Note>

If you are not satisfied with the result, press the [UNDO/REDO] key to undo the opera- tion (see page 62).

3)Use the [CURSOR ] key to highlight "Track", then press the [ENTER] key.

The display now shows the track edit menu selec- tion screen, in which "EraseTrack" is highlighted ini- tially.

4)Use the [CURSOR ] key to highlight "Copy-Paste Trk", then press the [ENTER] key.

63