Fostex MR-8 owner manual Press the Enter key

MR-8 Owner’s Manual

The display now shows the screen for selecting the source track(s) and destination track(s) of copy/ paste. "SourceTrack" selects the copy source track(s), while "Dest. Track" selects the paste destination track(s).

The current position information is shown at the top of the screen (shown in Bar/Beat base in the screen example below).

flashing

5) Use the [CURSOR /] keys to select the source track(s) to be copied.

You can select from among mono tracks (1 through

8) and stereo pair tracks (1/2, 3/4, 5/6 and 7/8).

6)Use the [CURSOR ] key to move the cursor to the option for "Dest.Track".

7)Use the [CURSOR /] keys to select the destination track(s).

If you select a mono track for the copy source in step 5 above, you can select a mono destination track. If you select stereo pair tracks for the copy source in step 5 above, you can select stereo pair destination tracks.

<Note>

You cannot select the same track(s) for the copy source and destination.

8)Use the [CURSOR ] key to move the cursor to "ENTER" on the screen, then press the [ENTER] key.

The display shows "Please Wait!", immediately fol- lowed by "Completed!" when the MR-8 completes the copy/paste operation.

<Note>

If you want to cancel the copy/paste op- eration, move the cursor to "CANCEL" on the screen, then press the [ENTER] key.

<Note>

If a destination track has recorded data, pasting the copied data overwrites the pre- vious data.

9)Press the [ENTER] key.

The display returns show to the screen in which "Copy-Paste Trk" is highlighted.

10)Press the [MENU] key to exit the menu mode.

<Note>

If you are not satisfied with the result, press the [UNDO/REDO] key to undo the opera- tion (see page 62).

64