Fostex MR-8 owner manual Track editing, Undo/redo of track editing

MR-8 Owner’s Manual

Trackediting

The following describes how to edit whole selected (mono or stereo) track data.

<Undo/redo of track editing>

By pressing the [UNDO/REDO] key after executing the track edit operation, you can undo the editing. By pressing the [UNDO/REDO] key after the undo operation, you can return the track(s) to the condition after being edited.

<Notes>

If there is not enough space on the CompactFlash card for executing the undo operation, the display shows "Warning Card Full! Can't Undo!" when you are going to make editing. If you carry out any of the following, you cannot undo the editing anymore.

1.Making new recording

2.Making new editing

3.Turning off the power

4.Loading another song

Erasing whole track data

You can erase whole data (from ABS ZERO to REC END) of the desired mono or stereo track(s) of the song currently loaded.

ABS ZERO	REC END
TRK 1
TRK 2
TRK 3	Silent
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8

3)Use the [CURSOR ] key to highlight "Track", then press the [ENTER] key.

The display now shows the track edit menu selec- tion screen, in which "Erase Track" is highlighted initially.

<Note>

You cannot erase track data of a song pro- tected. Release the protection before erasing track data.

1)Load the song you want to edit.

2)While the recorder is stopped, press the [MENU] key to enter the menu mode.

The display shows the menu selection screen, in which "System" is highlighted initially.

4)While "Erase Track" is highlighted, press the [ENTER] key.

The display now shows the screen for selecting the track(s) to be erased. Initially, "1" flashes.

The current position information is shown at the top of the screen (shown in Bar/Beat base in the screen example below).

flashing

62