2.Press function buttons 2 and 3 simultaneously and hold them down. The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 1.
The LED indicator for function button 1 will flash. The
4.Pressing function button 1 increases the hardness setting by 1. (Exception: hardness setting 1 follows hardness setting 10).
5.When the hardness setting is correct, press the ON/OFF button. The hardness setting is now saved.
If the water softener is set electronically to “1”, this switches off the control indicator for dishwasher salt.
Water hardness | Adjusting the hardness | Indication on the | ||
|
| |||
in °fh1)) | in °dh2)) | setting | ||
90 - max. 125 | 51 - max. 70 | 103) | 10L . | |
76 - 89 | 43 - 50 | 9 | 9L | |
65 - 75 | 37 - 42 | 8 | 8L | |
51 - 64 | 29 - 36 | 7 | 7L | |
40 - 50 | 23 - 28 | 6 | 6L | |
33 - 39 | 19 - 22 | 5 | 5L | |
26 - 32 | 15 - 18 | 4* | 4L | |
19 - 25 | 11 - 14 | 3 | 3L | |
07 - 18 | 4 - 10 | 2 | 2L | |
|
|
|
| |
below 7 | below 4 | 1 | 1L | |
no salt necessary | ||||
|
|
| ||
|
|
|
|
1)(°fh) French degree, measure of the hardness of water
2)(°dh) German degree, measure of the hardness of water
3)On this setting the length of the dishwashing cycle may be slightly longer. *) factory setting
9