Fitting the hinged door
1.Fit the two lateral bars A as in the figure opposite. Use aligning disks B.
2.Stand the machine in front of the kitchen unit into which it is to be in- stalled. Place cable and hoses into the neighbouring unit.
As you push the machine in, keep on pulling the cable and hoses through and ensure that they do not become kinked.
3.Align the machine laterally in the plinth area with the angle AN, tight- en the screw V slightly.
4.Screw the bottom unit of the hinge onto the hinge support (use Euro screws 4.0x20.).
35
