Cleaning the spray arms

Regularly check the nozzles in the three spray arms for blockages. If necessary, clean the nozzles with a piece of fine wire or a fine needle and a strong water jet.

1 Do not damage the nozzle openings.

Top spray arm

1.Undo the fixing screw (A) by turning anti-clockwise.

2.Pull the spray arm off the shaft.

3.Clean the spray arm and the fixing screw.

4.Fasten the spray arm with the fixing screw (A) turning clockwise.

Middle spray arm

1.Remove the middle spray arm by turning it laterally.

The two-part spray arm bearing is held together by a tension spring (B)

2.Clean spray arm nozzles.

3.To re-fit, press the middle spray arm upwards until you feel it snap into place.

Lower spray arm

1.Undo the fixing screw (C) by turning anti-clockwise.

2.Pull the spray arm off the shaft.

3.Clean the spray arm and the fixing screw.

4.Fasten the spray arm with the fixing screw (C) turning clockwise.

25

Page 25
Image 25
Electrolux 64570 Vi manual Cleaning the spray arms, Top spray arm, Middle spray arm, Lower spray arm