Building, 510 | Electrolux 79902G instruction

Building In

	A	=	Auxiliary burner	SR
	SR	=	Semirapid burner

	R	= Rapid burner		SR

R

A

Dimensions are given

in millimetres

Fig. 1

510

730

The hob is designed to be inserted in modular kitchen units with depth of 550 - 600 mm and having proper characteristics.

The building-in is also possible in modular units with a 600 mm width: in this case, the cut-out in the work top must be carried out as shown in Fig. 2.

The worktop must be at least 30 mm thick.

If the worktop is thicker than 50 mm, it is possible to install the hob on modular units of any width.

Any unit (furniture unit, household appliance, etc..) placed near the unit which the hob is built in, shall not exceed the worktop height.

A minimum clearance of 100 mm between the cut-out in the worktop and any side wall exceeding the worktop height must be observed.

The hob dimensions and the cut-out dimensions are given in fig. 1 and 2.

A) Worktop

Fig. 2

B)Removable Panel

36

Image 36

Electrolux 79902G manual Building, 510

Contents

79902G Innovative features of your gas hob Contents For your safety InstallationChild Safety During use Safety Instructions Guide to Use the instructionsHints and Tips Environmental Information Description of the hob SemirapidSemirapid Burnerburner Operating instructions Touch Controls How to light a burner How to turn off a burner Case of ignition failure Case of accidental extinguishing automatic reignition SparkPlug How to turn off all the burners at once Burner Safety Cut-off FunctionHob Safety Cut-off Function If you select the burner that doesn’t work Child Safety Function If you select all the burners with the TimerSymbol lights up and an acoustic signal Sounds Protection against overheating Electronic Timer How to programme a burner to switch off Light the burner and adjust the flame levelMax. time 99 minutes To adjust the cooking time How to set the Minute Minder Function To adjust the time setting Safety and energy-saving advice For a correct use of the hob Cooking Table Cleaning and maintenance Hob Top Pan Supports BurnersObstructed Switches are turned off or Safety FunctionFlame level adjustment is There are blown fuses FHave the fuses replacedPage Service and Spare Parts Customer CareCalls to this number may be recorded for training purposes Guarantee Conditions Standard guarantee conditionsEuropean Guarantee Exclusions Instructions for the Installer Gas burner powerOverall dimensions Cut out dimensions Important safety requirements Provision for ventilation Location Connection Electrical connections Green and Yellow Earth BlueBrown Live Supply cable replacement Wiring Diagram Burner characteristics Conversion to LPGReplacing the injectors Setting the hob for the new gas type Minimum flame adjustment Page Building 510 Fitting the hob to the worktop Installation possibilities Building over a kitchen unit with doorBuilding over a unit with an oven Removable panel 50 cm AEG Haugeräte GmbH Postfach 90327 Nürnberg Copyright by AEG 35688-7301 04/05