Something not working?

If the hob is not working correctly, please carry out the following checks before contacting your local Service ForceCentre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

PROBLEM

CAUSE

 

 

 

fSOLUTION

 

 

THE HOB

There are blown fuses in the

fHave the fuses replaced.

DOESN’T

domestic electrical system.

 

 

 

 

 

 

WORK

Switches are turned off or

fReset the switches.

 

 

there is no power at the power

 

 

 

 

 

 

 

outlet.

 

 

 

 

 

 

 

 

 

 

The hob is not activated.

 

f Touch

the

main

On/Off

 

 

 

 

 

 

Control

 

.

 

 

 

 

The main gas supply tap is

fOpen the tap.

 

 

 

closed.

 

 

 

 

 

 

 

 

 

 

The gas bottle is empty.

 

fPurchase a new bottle.

 

The hob has overheated and a

fAllow the top to cool (see

 

safety device has been set on

par. “Protection

against

 

the four burners.

 

 

overheating”).

 

 

 

The Child Safety function has

fDeactivate the Child Safety

 

been inadvertently activated.

function

(see

par. “Child

 

Safety Function”).

 

 

 

 

 

 

 

 

A BURNER

The safety device has been set

f Wait

60

seconds, then

DOESN’T

on the burner due to repeated

follow

the

instructions

WORK

ignition failures. The flame

given in chapter: “In case of

 

level

indicators

and

the

ignition failure”.

 

 

residual heat indicator flash.

fCheck the correct position

 

The pan support or the burner

 

(see par. “In case of ignition

 

cap

and

crown

were

not

 

failure”).

 

 

 

 

 

correctly

positioned after

 

 

 

 

 

f Follow the

instructions

 

cleaning.

 

 

 

given

in

the

section

 

The burner crown holes are

 

“Cleaning

 

 

and

 

obstructed.

 

 

 

 

 

 

 

maintenance”.

 

 

 

 

 

 

 

 

 

 

 

The defect persists.

 

 

f Contact

an

authorized

 

 

 

 

 

 

technical assistance centre.

ITTAKESTOOLONG

The flame level adjustment is

f See the section “How to

TO FINISH THE

not appropriate.

 

 

light a burner”

 

 

DISHES / THEY

 

 

 

 

 

 

 

 

 

 

 

ARE COOKED

 

 

 

 

 

 

 

 

 

 

 

TOO FAST.

 

 

 

 

 

 

 

 

 

 

 

21

Page 21
Image 21
Electrolux 79902G There are blown fuses FHave the fuses replaced, Domestic electrical system, Switches are turned off or