Electrolux B4140-1 manual What to do if, Information for appliances with a metal front

Operating Instructions

What to do if ...

	Symptom	Possible cause	Solution
	The oven does not heat	The oven has not been	Switch on the oven.
	up.	switched on.
		The time has not been set.	Set the time.
		The necessary settings have	Check the settings.
		not been made.
		The oven safety cut-out has	See
		been activated.	Safety Cut-out.
		The circuit breaker (at the	Check the fuse.
			If the circuit breaker trips or
		household fuse box) has
			the fuse blows several times,
		tripped or the fuse has
			please call an approved elec-
		blown.
			trician.
	Pyroluxe is not func-	The oven shelf runner has	Remove oven shelf runner.
		not been removed.
	tioning
	The oven door is locked	The appliance is not plugged	Plug in the appliance and
		in; The door lock has been	wait at least 10 seconds until
		activated.	the red temperature pilot
			light goes off.
	The oven lighting does	The oven light bulb has	Replace the light bulb in the
	not come on.	blown.	oven (see Cleaning and Care).
	If you cannot rectify the fault with the help of the information
	given above, please contact your local Service Force Centre.
1	Warning: Repairs to the appliance may only be carried out by qualified
	specialists. Improper repairs can give rise to significant hazards for the
	user.
	If the appliance has been used improperly, the customer service engi-
	neer's visit or that of the specialist dealer will not be free of charge,
	even during the warranty period.
	Information for appliances with a metal front:
3	Due to the cold front of your appliance the inner door glass may steam
	over briefly if you open the door during or shortly after baking or

roasting.

52