Electrolux B57415B Pyrolytic cleaning, Changing the length of time for the pyrolytic cleaning

44Cleaning and care

Pyrolytic cleaning

1Warning: The oven gets extremely hot during this process. Young children must be kept away.

1Important! Before carrying out pyrolytic cleaning, all removable parts including the side rails, must be removed from the oven.

3If you use the oven shelf runners that are available as special accessories, these must be removed before pyrolytic cleaning.

If the side rails or oven shelf runners are still in place, ‘C1’ appears in the clock display.

The pyrolytic cleaning process then cannot be started due to a safety cut-out that protects the side rails/oven shelf runners.

Pyrolytic cleaning

1.First remove the worst of the residue manually.

2.Select oven function Pyroluxe .

–“3:15” appears in the display,

–Cook time flashes for approx. 5 seconds.

Pyrolytic cleaning then starts.

3The Light does not work.

When a pre-set temperature is reached, the door is locked.

The bars of the heat indicator light up, until the door is unlocked again.

Changing the length of time for the pyrolytic cleaning

1.Proceed as described in the section “Pyrolytic cleaning”.

2.As long as Cook time is flashing, select the desired length for the process

using or :

“ / 2:15” or “3:15”

Cook time flashes for approx. 5 seconds. Pyrolytic cleaning then starts.

3If Cook time is no longer flashing, press the Select button again and then perform the setting procedure.

Changing the switch-off time for the pyrolytic cleaning

The switch-off timecan be delayed using the clock function End time (within 2 minutes of the pyrolytic cleaning starting).

When the different processes for pyrolytic cleaning are set: P2 - 2:15 = Pyroluxe easy: For a light degree of soiling,

P1 - 3:15 = Pyroluxe intensive: For a high degree of soiling.