Electrolux CF921BS00 Trouble Shooting, Probable Cause, Suggested Remedy, Fan will not start

Trouble Shooting

! WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan.

TROUBLE		PROBABLE CAUSE		SUGGESTED REMEDY
1. Fan will not start.	1.	Fuse or circuit breaker blown.	1.	Check main and branch circuit fuses or circuit
				breakers.
	2.	Loose power line connections to the fan,	2.	Check line wire connections to fan and switch
		or loose switch wire connections in the		wire connections in the switch housing.
		switch housing.	!	WARNING: Make sure main power is
				turned OFF.
	3.	Dead battery in remote control transmitter.	3.	Replace battery (red indicator light on transmitter
				should light when any button is pressed).
	4.	Code switches in remote control receiver	4.	Check that code switches are in same positions.
		and transmitter are not in same positions.		Reset if necessary.
2. Fan sounds noisy.	1.	Blades not attached to fan.	1.	Attach blades to fan before operating.
	2.	Loose screws in motor housing.	2.	Check to make sure all screws in motor housing
				are snug (not over-tight).
	3.	Screws securing fan blade flanges to	3.	Check to make sure the screws which attach
		motor hub are loose.		the fan flanges to the motor hub are tight.
	4.	Wire connectors inside switch housing	4.	Check to make sure wire connectors in switch
		rattling.		housing are not rattling against each other or
				against the interior wall of the switch housing.
			!	WARNING: Make sure main power is
				turned OFF.
	5.	Screws holding blades to flanges	5.	Tighten screws securely.
		are loose.
3. Fan wobbles	1.	Setscrew in motor coupling is loose.	1.	Tighten both setscrews securely in the motor
excessively.				coupling.
	2.	Setscrew in hanger ball/downrod	2.	Tighten the setscrew in the hanger ball/
		assembly is loose.		downrod assembly.
	3.	Screws securing fan blade flanges to	3.	Check to be sure screws which attach the fan
		motor are loose.		blade flanges to the motor are tight.
	4.	Fan blade flanges not seated properly.	4.	Check to be sure the fan blade flanges seat
				firmly and uniformly to the surface of the motor.
				If flanges are seated incorrectly, loosen the
				flange screws and retighten according to the
				procedure in the section on "How to Put
				Your Ceiling Fan Together".
	5.	Hanger bracket and/or ceiling outlet	5.	Tighten the hanger bracket screws to the outlet
		box is not securely fastened.		box, and/or secure outlet box.
	6.	Fan blades out of balance.	6.	Interchanging an adjacent (side-by-side) blade
				pair can redistribute the weight and result in
				smoother operation.

15 ETL Model No.: CF921