CARE AND CLEANING
BEFORE CLEANING THE OVEN ALWAYS ALLOW THE COOLING FAN TO COOL THE OVEN DOWN BEFORE SWITCHING OFF THE ELECTRICITY SUPPLY.
CLEANING MATERIALS
Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives and scourers should also be avoided as damage will occur.
CLEANING THE OUTSIDE OF THE OVEN
Regularly wipe over the control panel, oven doors and handles using a soft cloth and hot soapy water. To prevent streaking finish with a soft cloth.
Do not attempt to remove any of the control knobs from the panel as this may cause damage and is a safety hazard.
Under no circumstances should the door assembly be detached from the product for cleaning. Please refer to the cleaning instructions.
Model D4150-1M only
Stainless steel cream cleaners can be abrasive and should be avoided as damage to the surface finish can occur. Washing up liquid and hot water or liquid stainless steel cleaners such as Homecare Stainless Steel Cleanser and Polish may be used to remove fingermarks.
REMOVING AND REPLACING
WIREWORK SIDE RUNNERS
Remove all shelves and furniture from the oven. If fitted ensure the telescopic runners are pushed back into place in the oven cavity. Hold the bottom of the wirework runners and draw the runners towards the centre of the oven. Unhook from the top and remove.
The telescopic runners should be dried carefully after washing in hot water to which washing up liquid has been added. lf heavily soiled mild abrasives may be used.
To replace the runners, hook the wirework side runner into the cavity, slide back and press into place.
BRACKET
CAVITY CENTRE
Ensure the wirework runners are firmly in position before replacing the oven shelves.
31
