Electrolux D4150-1 FITTING INTO THE CABINET

FITTING INTO THE CABINET

Using a tape measure establish the internal

width of the cabinet. Refer to page 41 if greater

than 565mm.

Position the appliance in front of the cabinet.

See Fig. 8.

Take out all oven furniture before installation to

reduce the weight you need to lift. The oven

door should be taped up to keep it closed whilst

lifting.

To place the appliance into the cabinetry follow

the procedure below:

N.B. Two people will be required to carry

out the lifting procedure.

Warning: Do not attempt to lift this

appliance by the handle(s).

Each person should squat either side of the

appliance.

Tilt the appliance so that your hands can

support the underside of the appliance.

Keeping your back straight, raise the appliance

to the cabinet by straightening at the knees.

Rest the rear underside of the appliance on the

cabinet floor while your hands support the front.

The appliance can be pushed fully into the

cabinet. Take care to avoid damaging the

mains lead.

Ensure the appliance is central in the cabinet

and level.

Do not remove spacer fitted behind fixing

holes.

When the appliance is fully housed screw the

stability screws (supplied with the appliance)

into the side of the cabinet taking care not to

distort the side trims (See Fig. 9). It is advisable

to turn each screw alternately to avoid

damaging the trims.

Switch on the appliance then refer to the

operating instructions.

46

Fig.8

IMPORTANT: Ensure that the oven is

switched off at the wall before any

further work is carried out.

Fig.9

(Cable not supplied)

COMPETENCE D4150-1- 311572706

Contents

Main INSTALLATION CHILD SAFETY DURING USE CLEANING AND MAINTENANCE SERVICE CONTENTS FOR THE USER FOR THE INSTALLER DESCRIPTION OF THE OVEN Build-in electric multifunction double oven. GETTING TO KNOW YOUR OVEN The Control Panel The Cooling Fan for the Controls Control Panel Indicator Neons Pop In Pop Out Controls GRILL AND OVEN FURNITURE Note Telescopic Runners BEFORE USING THE OVEN FOR THE FIRST TIME When first switching on Rating plate Preparing to use your oven Condensation and Steam ELECTRONIC TIMER TO CANCEL THE COUNTDOWN 3. SETTING THE OVEN TIMER CONTROL A) TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY B) TO SET THE TIMER TO SWITCH OFF ONLY 4. TO CANCEL AN AUTOMATIC PROGRAMME 5. TO RETURN THE APPLIANCE TO MANUAL 6. THINGS TO NOTE 7. AUTOMATIC COOKING THE DUAL GRILL THE GRILL PAN AND HANDLE Note GRILLING CHART TO FIT THE SECOND OVEN SHELF USING THE SECOND OVEN THE SECOND OVEN Page SECOND OVEN COOKING CHART THE MAIN FAN OVEN TO FIT THE MAIN OVEN SHELVES PREHEATING COOKING TEMPERATURES BATCH BAKING USING THE TELESCOPIC RUNNERS Note THE CONVENTIONAL OVEN USING THE CONVENTIONAL OVEN Page OVEN COOKING CHART ROASTING CHART ROASTING CHART HINTS AND TIPS USING PIZZA FUNCTION PIZZA FUNCTION COOKING TIMES USING SPEEDCOOK SPEEDCOOK THERMAL GRILLING USING THERMAL GRILLING COOKING TIMES THERMAL GRILLING CHART DEFROSTING USING DEFROST FEATURE Page HELPFUL HINTS WHEN BUYING AND PREPARING FOOD CLEANING MATERIALS CLEANING THE OUTSIDE OF THE OVEN Model D4150-1M only REMOVING AND REPLACING WIREWORK SIDE RUNNERS CARE AND CLEANING CLEANING INSIDE THE OVENS CLEANING THE DOOR GLASS TO REMOVE THE INNER GLASS TO CLEAN THE INNER GLASS DOOR PANELS TO REPLACE THE INNER GLASS PANEL CLEANING THE GRILL AND OVEN FURNITURE REPLACING AN OVEN LIGHT BULB SOMETHING NOT WORKING Page 0870 5 929929 SERVICE AND SPARE PARTS CUSTOMER CARE DEPARTMENT GUARANTEE CONDITIONS Standard guarantee conditions European Guarantee INSTALLATION INSTRUCTIONS TECHNICAL DETAILS WARNINGS: CHOICE OF ELECTRICAL CONNECTION NOTE: HOUSE CIRCUIT PREPARING CABINET FOR FITTING OF OVEN RECOMMENDED CABINET DIMENSIONS HOW TO FINISH UNPACKING TOOLS REQUIRED MAKING THE ELECTRICAL CONNECTIONS PREPARING CABLE TO REMOVE COVER OF MAINS TERMINAL CONNECTING TO MAINS TERMINAL CONNECTING TO A HOB OR COOKER POINT CHECKING ELECTRICAL CONNECTIONS NOTE: HOUSE CIRCUIT FITTING INTO THE CABINET Warning: Do not attempt to lift this appliance by the handle(s).